Channel Master DVR+ - Important Safety Instructions; Installation and Safety

iii
Important Safety Instructions, continued
14 WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain,
moisture, dripping or splashing.
15 The power adapter must remain easy to unplug from the power socket once the equipment is
installed.
16 DO NOT expose the remote control batteries to excessive heat such as re or sunshine.
17 Safety-related markings can be found on the underside of the receiver.
Installation
• Ground the installation in accordance with NEC
®
or other applicable codes.
• Locate the power adapter and receiver indoors in an open, well-ventilated area. Do not place
them in an enclosure (such as a cabinet) without proper ventilation.
• Place the receiver on its feet on a rm, stable, horizontal surface.
• Unplug the power adapter from the power socket during installation and follow all connection
instructions.
• Only connect the original power adapter to the receiver. Other power adapters may damage
the circuitry and cause a re risk.
• DO NOT place heavy objects on the receiver or power adapter.
• Keep plastic packaging and small parts away from babies and children.
Protect from Water
• DO NOT place objects lled with liquids, such as vases or drinks, on or near the power
adapter or receiver.
General Precautions
• DO NOT remove the power adapter cover due to risk of electric shock from live parts inside.
• DO NOT allow objects to drop or be pushed inside the receiver, for example by children.
• DO NOT place naked ames such as lighted candles on or near the receiver or power
adapter.
Equipment Care
• Unplug the power adapter from the power socket before cleaning.
• If the power adapter or receiver is damaged, unplug it from the power socket and have it
checked by qualied personnel before operating it any further.