Channel Plus 5515 - User Manual

Warranty
600-226 Rev B
600-226 Rev B
Multiplex Technology, Inc. warrants this product to be free
from defects in materials and workmanship for a period of
one year from the date of purchase or MTI will repair, or at
its option, replace the defective product. To obtain
warranty service, call MTI for a return material
authorization (RMA) number and return the product
prepaid to Multiplex Technology, Inc., 3001 Enterprise
Street, Brea, CA 92821, Attention: Customer Service.
Please put the RMA number on the outside of the carton.
Any implied warranty arising from the sale of the product
including implied warranties of merchantability and fitness
for purpose are limited to the warranty stated above. MTI
shall not be responsible for losses or damages or
expenses, whether direct, consequential or incidental
arising from the use of or the inability to use this product.
Some states do not allow limitations on how long the
implied warranty lasts or the exclusion or limitation or
incidental or consequential damages, so the above
limitations and exclusions may not apply to you. This
warranty gives you specific legal rights, and you may have
other rights which may vary from state to state.
Printed in China
Printed in China
Multiplex Technology, Inc., Brea, CA 92821
Multiplex Technology, Inc., Brea, CA 92821
This device complies with the FCC's Part 15 Rules for TV
interface devices. Any change or modification to this
device without the permission of Multiplex Technology, Inc.
may void the user's authority to operate this equipment.
PERFORMANCE MULTI-ROOM VIDEO
Model 5515
Frequency-Agile
Video Modulator
Modulator
Installation Manual
3001 Enterprise Street, Brea, CA 92821-6213, U.S.A.
714-996-4100 * 800-999-5225 * FAX 714-996-4900 * www.channelplus.com
multiplex
technology, inc.
®
TM
model 5515 digital modulator with ir output
model 5515 digital modulator with ir output
pll frequency control
pll frequency control
program
pwr
TM
IR

Summary

Warranty Information

Warranty Terms and Return Process

Details the product warranty period, repair/replacement options, and return procedures.

Modulator Installation Guide

Model 5515 Overview

Introduces the Model 5515 frequency-agile video modulator.

IMPORTANT SAFETY INSTRUCTIONS

General Operating Safety

Lists essential safety guidelines for operating and maintaining the product.

Technical Specifications and Compliance

Product Specifications

Provides detailed technical specifications for the 5515 modulator.

FCC Declarations and Safety

Covers FCC compliance, installation requirements, plug safety, grounding, and servicing.

Troubleshooting and Setup

Common Issues and Solutions

Addresses troubleshooting for picture, interference, audio, and modulation standards.

CATV System Grounding

Provides specific grounding guidelines for CATV installers per NEC.

Controls, Connections, and Programming

Interface Overview

Identifies controls, connections, LEDs, and programming procedures.

Channel Selection and Readback

Details valid channels, spacing, error indications, and retrieving programmed channels.

System Diagram and Programming

Sample System Setup

Illustrates system configuration and IR control setup.

Programming Examples

Provides step-by-step instructions for programming specific channels (67 and 120).

Programming and Compliance

Channel 120 Programming

Continues detailed instructions for programming the modulator to channel 120.

Installer Compliance

Highlights installer responsibility for FCC compliance, especially signal strength.

Channel Plus 5515 Specifications

General

Type	Modulator
Model	5515
Brand	Channel Plus
Video Inputs	1
Audio Inputs	1
Output Channels	1
Power Supply	12V DC
Video Input Level	1 Vp-p
Audio Input Level	0.5 Vp-p
Video Bandwidth	4.2 MHz
Audio Carrier Frequency	4.5 MHz
Modulation	NTSC