EasyManua.ls Logo

Char-Broil 463271315 - User Manual

Char-Broil 463271315
60 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
10/24/14 • G520-001-320801
If you have questions or need assistance
during assembly, please call 1-888-430-7870.
Si vous avez des questions ou besoin d´aide
pendant l’assemblage, S’il vous plaît appelez
1-888-430-7870
Si tiene alguna pregunta o si Necesita
ayuda durante el Ensamblado, llámenos Al
1-888-430-7870
Serial number | Numéro de série | Número de serie
Date purchased | Date d’chat | Fecha de compra
See rating Label on grill for serial number.
El número de serie se encuentra en la etiqueta de
especificaciones de la parrilla.
Ce numéro se trouve sur l´étiquette signalétique sur
i´appareil.
463271315
Performance
#4584609
Convertit facilement de forme (LP)
propane liquide (NG) de gaz naturel
ENSEMBLE DE CONVERSION

Table of Contents

Questions and Answers

  • B
    Brian DavisAug 12, 2025
    What to do if Char-Broil 463271315 has a sudden drop in gas flow or low flame?
    • K
      Kendra JamesAug 12, 2025
      If your Char-Broil Barbecue grill experiences a sudden drop in gas flow or low flame, here's what you can do: * Check for gas in the LP cylinder, as you might be out of gas. * If the excess flow valve has tripped, turn off the knobs, wait 30 seconds, and light the grill. If the flames are still low, turn off the knobs and the LP cylinder valve, disconnect the regulator, reconnect the regulator, perform a leak test, turn on the LP cylinder valve, wait 30 seconds, and then light the grill. * In case of a vapor lock at the coupling nut/LP cylinder connection, turn off the knobs and LP cylinder valve, disconnect the coupling nut from the cylinder, reconnect it, and try again.
  • C
    Cameron RamirezAug 16, 2025
    Why do flames blow out on my Char-Broil 463271315?
    • M
      Mr. William GibbsAug 16, 2025
      Flames on your Char-Broil Barbecue grill might blow out due to several reasons: * High or gusting winds can cause this. Turn the front of the grill to face the wind or increase the flame height by turning the gas valve to a higher position. * If you're low on LP gas, refill the LP cylinder. * An excess flow valve tripped can also cause this issue. Refer to “Sudden drop in gas flow” to resolve this.
  • D
    Daniel CortezAug 19, 2025
    How to stop flare-ups on a Char-Broil 463271315?
    • J
      James LeeAug 20, 2025
      Flare-ups on your Char-Broil Barbecue grill can be minimized by: * Cleaning the burners and the inside of the grill/firebox to remove grease buildup. * Trimming fat from meat before grilling to reduce excessive fat. * Adjusting (lowering) the cooking temperature if it's excessively high.
  • S
    Sergio SmithAug 23, 2025
    What to do if my Char-Broil 463271315 Barbecue grill has a persistent grease fire?
    • P
      patrickwardAug 23, 2025
      If your Char-Broil Barbecue grill has a persistent grease fire: * Turn the knobs to OFF. * Turn the gas off at the LP cylinder. * Leave the lid in position and let the fire burn out. * After the grill cools, remove and clean all parts. This is likely due to grease trapped by food buildup around the burner system.
  • H
    Helen GarzaAug 27, 2025
    What causes flashback (fire in burner tube(s)) in Char-Broil Barbecue grill and how to fix it?
    • S
      Shannon EllisAug 27, 2025
      A flashback (fire in burner tube(s)) in your Char-Broil Barbecue grill typically occurs because the burner and/or burner tubes are blocked. To resolve this: * Turn the knobs to OFF. * Clean the burner and/or burner tubes. See burner cleaning section of Use and Care.
  • T
    Thomas SmithAug 30, 2025
    Why one burner does not light from other burners on Char-Broil Barbecue grill?
    • K
      kyangAug 31, 2025
      If one burner does not light from other burners on your Char-Broil Barbecue grill, it's likely due to grease buildup or food particles in the end(s) of the carryover tube(s). Clean the carry-over tube(s) with a wire brush.
  • B
    brookemooreSep 3, 2025
    What to do if no sparks appear at electrodes but noise can be heard from spark module in Char-Broil 463271315?
    • M
      Melinda ReynoldsSep 4, 2025
      If no sparks appear at any electrodes when the Electronic Ignition Button is pressed, but noise can be heard from the spark module of your Char-Broil Barbecue grill, it might be due to output lead connections not connected. Remove and reconnect all output connections at the module and electrodes.
  • J
    Jeremy LyonsSep 7, 2025
    How to troubleshoot weak or absent sparks at some electrodes on Char-Broil 463271315?
    • M
      mcclurelouisSep 7, 2025
      If sparks are present but not at all electrodes and/or not at full strength on your Char-Broil Barbecue grill, consider these solutions: * Ensure output lead connections are securely connected. Remove and reconnect all output connections at the module and electrodes. * Check for arcing to the grill away from the burner(s). Observe the grill in a dark location, operate the ignition system, and look for arcing between output wires and the grill frame. * Replace the battery with a new alkaline battery if the current one is weak. * Use a paper towel to remove moisture if the electrodes are wet. * Replace cracked or broken electrodes if they are sparking at the crack.

Char-Broil 463271315 Specifications

General IconGeneral
BrandChar-Broil
Model463271315
CategoryBarbecue grill
LanguageEnglish