Need help?Do you have a question about the CHART MVE 510 and is the answer not in the manual?
Details hazards associated with LN2 and essential safety precautions for its handling.
Outlines first aid procedures for exposure to cryogenic liquids, cold vapor, or asphyxiation.
Describes freezers maintaining vapor storage temperatures (-150°C or -190°C) with minimal LN2 evaporation.
Details freezers designed for liquid phase storage with wide neck openings for easy sample access.
Describes freezers optimized for vial and straw storage in liquid nitrogen, with features like dual lids.
Presents freezers designed for liquid phase storage with a square cabinet for tight corner fitting.
Highlights freezers maintaining -190°C vapor storage with easier access to plumbing stacks and lower height clearance.
Covers basic receiving, installation, and setup procedures for MVE freezers, including probe insertion.
Provides an overview of the TEC 3000's monitoring and control capabilities within a cryogenic freezer.
Details how to access and adjust temperature settings, including sensor enabling and alarm configuration.
Explains how to adjust auto fill settings, including high/low level setpoints and alarms for LN2 control.
Explains the multilevel security system, password entry modes, and global password management.
Details single-point and two-point calibration procedures for TEC 3000 temperature sensors.
Guides on calibrating the LN2 level reading using the meter dip stick and controller settings.
Explains single-point and two-point calibration procedures for the hot gas bypass sensor.
Outlines a recommended periodic maintenance schedule for ensuring optimal freezer performance and lifespan.
Details essential maintenance tasks including level verification, supply checks, leak tests, and component replacements.
To Next Page
General