Need help?Do you have a question about the Chatillon TCM Series and is the answer not in the manual?
General| Brand | Chatillon |
|---|---|
| Model | TCM Series |
| Category | Test Equipment |
| Language | English |
Introduction to the TCM Series Motorized Test Stand and encouragement for product registration.
Covers crush hazards and safe operation practices for handling the test stand.
Addresses electrical hazards, high/low temperatures, and potential energy risks.
Includes risks of tipping, electric shock, and maintaining a clean work area.
Details the available TCM100 and TCM350 series motorized test stands.
Lists standard and optional accessories included with the TCM Series testers.
Recommends Chatillon force gauges compatible with the TCM Series testers.
Details the eight touch-sensitive buttons on the TCM front panel and their general functions.
Explains the operation of the Start/Stop and Return to Zero (RTZ) buttons.
Describes how to use the Jog Up, Jog Down, and Zero buttons for crosshead movement.
Explains how to adjust the crosshead speed using the Speed Up and Speed Down buttons.
Explains setting operation modes and speed units (mm/in) using the Mode button.
Details the five indicators: speed, units, and operation modes.
Describes the 7-segment LED display indicating set speed and units.
Explains the 'mm' and 'in' indicators for crosshead speed units.
Explains the Compression and Tension arrow indicators for crosshead direction.
Details Compression-Standard and Tension-Standard modes, including limits.
Describes the Compression-Cycle mode, including direction changes and cycle counts.
Describes the Tension-Cycle mode, including direction changes and cycle counts.
Details the Communication, USB, and Digital Force Gauge (DFG) ports on the rear panel.
Explains different configurations for connecting a DFG to the TCM.
Details the main power switch and the procedure for replacing the main power fuse.
Explains the IEC power cord connection and the optional remote footswitch.
Explains how to activate and release the emergency stop button for immediate shutdown.
Lists and explains various fault and error codes displayed by the TCM.
Details the requirement to secure the TCM to a workbench using tapped holes.
Describes the standard mounting kit components, including bolts, spacers, and washers.
Specifies load capacity, travel range, and speed specifications for TCM models.
Details frame deflection and the measurement system used.
Explains the logic behind the TCM part numbering system.
Provides diagrams showing the standard and extended dimensions of the TCM unit.
Details the specifications and diagram for the standard mounting plate.
Provides specifications and diagrams for the optional multi-thread plate kit.
Lists optional accessories available for the TCM Series, including part numbers.
Provides contact details for AMETEK support in various international locations.
Outlines the procedure for returning products and obtaining an RMA number.
Details the two-year warranty against defects and exclusions.
To Next Page
