Need help?Do you have a question about the Chatillon DFX II Series and is the answer not in the manual?
General| Data Rate | 1000 Hz |
|---|---|
| Display | LCD |
| Power | AC adapter |
| Units | lbf, kgf, N |
| Output | RS-232 |
Raised hand icon for personal injury or death.
Lightning icon for electrical hazards.
Exclamation point icon for equipment malfunction.
Note icon for additional information.
Lists standards and compliance for the DFX II Series.
Lists standard accessories supplied with the DFX II Series.
Explains how to view captured peak load measurements.
Displays the gauge's capacity and resolution.
Shows the gauge's firmware model, revision number, and date.
Displays the overload history, including tension and compression counts.
Describes the physical setup for calibration, including fixtures.
Navigates to calibration mode and diagnostics options.
Step-by-step guide for tensile test in Normal mode.
Captures the maximum tensile load achieved during the test.
Step-by-step guide for compression test in Normal mode.
Captures the maximum compressive load achieved during the test.
Details accuracy, data rate, peak capture, and other performance metrics.
Covers storage, operating temperature, and humidity requirements.
To Next Page
