ChatterBox x2 slim - Power on DCSS;CTCSS Setting Mode; Setting Channels and Tones; Power on Bluetooth Pairing; Initiating Bluetooth Pairing

1. Power on DCSS/CTCSS Setting mode
No Button Functions
1
To enter
JogButton/JogDial
 Press “Power Key” & “PTT” Button more than 3 Sec
 Display on LCD
 Display 1 time Beep
 Voice display 1 : "Please Look at the LCD"
 Voice display 2 : "DCSS & CTCSS Setting"
 Display channels to set
2
To set
JogButton/JogDial
 Press JogButton/JogDial
 ("Channel" -voice guidance)
 -->change channel UP/DOWN
 ("Channel1~ Channel22" -voice guidance)
 -->To select channel ( press JogButton/JogDial)
 -->To change tone ( UP/DOWN) (DCSS/CTCSS/mute tone)
 -->select tone (Press JogButton/JogDial)
 -->To change frequency tone (UP/DOWN)
 (Channel UP/Down -voice guidance)
 --> To select frequency tone(press JogButton/JogDial)
 ("Completed"- voice guidance)
3
To complete & go
upper menu
JogButton/JogDial
1. While selecting tone, press quickly JogButton/JogDial twice to go upper menu.
voice guidance will come out as "DCSS & CTCSS Setting"
2. For mute tone, select mute tone (No voice guidance, no display on LCD), and press Jog dial one more
time to complete selection.- voice guidance
4
To complete
selection & turn
off (Power OFF)
To finish setting of tone, use power off and U will hear a voice guidance as “Completed"
After Beep, LCD OFF
2. Power on Bluetooth Pairing
1
Pairing
Button/Dial
Power Key + Press Jog Button more than 3 sec
It is impossible to interconnect a Cellphone via Bluetooth to the FRS/GMRS for retransmission,
it only for Cellphone via Bluetooth playing music to link the device. Not in GMRS/FRS bands
2 Display
1.Display Beep one time
2. Voice display : "Bluetooth Pairing"
3. LED Blinking
3
Paring Time
& pin number
1.Start pairing with Master’s mobile
PIN Code is "0000".
2. Only 10 minutes will be allowed for you to do pairing.