Chauvet LED-BAR - Supplementary Guide Manual

Appendix
DMX Channel Values
NOTE!
Enable DMX control by setting function SLA to “ON” in the control panel.
Channel 1 remains the same on all modes.
CHANNEL VALUE FUNCTION
1
000 Ù 030
031 Ù 100
101 Ù 180
181 Ù 240
241 Ù 255
Blackout & DMX Channel Configurations
Blackout
17 Channel Mode (RGB control of 4 sections)
5 Channel Mode (RGB control of all sections)
6 Channel Mode (Automatic run)
6 Channel Mode (Sound Active)
17 Channel Mode
CHANNEL VALUE FUNCTION
2 000 Ù 255 Red: 0 > 100%
3 000 Ù 255 Green: 0 > 100%
4 000 Ù 255 Blue: 0 > 100%
5 000 Ù 255 Dimmer: 0 > 100%
Section 1
6 000 Ù 255 Red: 0 > 100%
7 000 Ù 255 Green: 0 > 100%
8 000 Ù 255 Blue: 0 > 100%
9 000 Ù 255 Dimmer: 0 > 100%
Section 2
10 000 Ù 255 Red: 0 > 100%
11 000 Ù 255 Green: 0 > 100%
12 000 Ù 255 Blue: 0 > 100%
13 000 Ù 255 Dimmer: 0 > 100%
Section 3
14 000 Ù 255 Red: 0 > 100%
15 000 Ù 255 Green: 0 > 100%
16 000 Ù 255 Blue: 0 > 100%
17 000 Ù 255 Dimmer: 0 > 100%
Section 4
5 Channel Mode
CHANNEL VALUE FUNCTION
2 000 Ù 255 Red: 0 > 100%
3 000 Ù 255 Green: 0 > 100%
4 000 Ù 255 Blue: 0 > 100%
5 000 Ù 255 Dimmer: 0 > 100%
All Sections
LED-BAR User Manual 11
2007-03-22/17:06