Need help?Do you have a question about the Chauvin Arnoux STATOP 15 Series and is the answer not in the manual?
General| Input Type | Thermocouple, RTD, Pt100 |
|---|---|
| Output Type | Relay, SSR |
| Control Mode | ON/OFF, PID |
| Supply Voltage | 24V AC/DC, 100-240V AC |
| Measurement Range | Depending on the probe type |
| Resolution | 0.1°C |
| Probe Type | Thermocouple, RTD |
Essential precautions for installing microprocessor-based devices in industrial environments.
Steps for physically installing the controller into a panel cutout.
Instructions for wiring the controller, including terminal connections and output types.
Guidance on placing the temperature sensor for effective process control.
Identification and explanation of the controller's display and buttons.
Describes the initial startup sequence and display indications of the controller.
Visual guide to navigating the controller's programming menu structure.
Comprehensive explanation of all configurable parameters and their settings.
Guide to the various programming menus and their functions.
Configuration of security levels (LOCK parameter) to protect settings.
Instructions for operating the controller in manual mode for output control.
Explanation of the controller's normal automatic operation and setpoint adjustment.
Steps to navigate and modify parameters within the user menu.
Guide to setting up the controller's configuration parameters.
Procedure for selecting the correct sensor input type and range.
Steps to set up different alarm modes and types for output 2.
Note on recalibration importance and where to find the procedure.
Guide to automatically determine optimal PID regulation parameters.
Explanation of how to use ramp and timer functions for gradual setpoint changes.
Instructions for fine-tuning PID parameters manually.
List of product designations and their corresponding part codes.
Table of error codes, symbols, descriptions, and corrective measures.
Information on using spare parts and obtaining repair services.
To Next Page