Firstly please press clock , then press cancel & reset consistently for
4 times, there will appear the symbol of " " Now, When the keyboard is
in the state of Off , Micro-switch would not accept t he u sual c ommand.
Next press cancel & reset consistently f or 4 t imes, th e" " w ill di sappear.
Then the keyboard is On , so it could accept any command!
1.Firstly, please make s ure t hat t he k eyboard in th e s tate o f o n ,a nd th en
press Clock to check whether the time on the screen correspond with
the present time or not. If not, please press the week , retime , minute
to adjust the time to the current.
2.Press Timer, 1ON will appear in the left down on the left down of the
screen (it means the f irst ON time). Next, press minute, hour to input
the required time of ON .
3.Now press Timer , 1OFF appear in the left down of the LCD screen.
Next, press week hour minute to input the required time of ON
4.Again press Timer , 2ON & 2OFF ,8ON,8OFF will appear on the left
down . After reference to the steps 2&3, the each time of On & Off
could be set.
5.it must press cancel/reset if the 8 groups of s witches a re n ot r equired
everyday. So the rest of groups of time disappear, then the design of
will be in the screen.
6.after timer setting, pleas press , the screen w ill s how th e cu rrent tim e.
unday.
usage introduction
about the keyboard
Time Setting
Example 1: a kind of electronics is required to connect at 19:00
everyday, disconnect next day at 08:00
A.according to the steps 1.2, the screen is as the diagram 1a
B.according to the steps 3, the screen is as the diagram 1b
ON
C.according to the steps 5, the screen is as the diagram 1b, 2
OF F ON OF F
& 2 ,8 ,8 will appear in the screen as --:-- .
D.Again press timer to check whether each group of On & OFF
time is same as required. If not, please do as from AC
E.According to steps 6,7, take" "to automatic position.
7. Press Manual/auto to move the" "in the down screen to auto .
Now timer switch can automati c conne ct an d bre ak t he circ uit
according the time setting. If it temporary needs to switch on or off
the circuit during work,pleas e pres s manual/a uto to ma ke" "
remove correspondingly to the place of on/off .
8.Press timer , next press week . It could be set in eight state of on
& off . E.g. the s ame o r d ifferent f or e veryday, th e sa me fro m M onday
to Friday; the same from Monday to Saturday, the same Saturday
and Sunday.
EXAMPLE 2: one electronics is required to connect at 9:30am
from Monday to Friday,, disconnect at 16:30.
Follow the steps AE to make the screen on as diagram 2a,2b.
Mo TU WE TH FR SA Su
1
ON
19 : 00
Diagram 1a
Mo TU WE TH FR SA Su
1
OFF
8 : 00
Diagram 1b
Mo TU WE TH FR
1
ON
9 : 30
Diagram 2a
Mo TU WE TH FR
1
16 : 30
Diagram 2b
KG316T Micro-computer time switch
Theguideforusage
Please read this guide before using, ensure to use this product correctly!
After reading, please keep this guide.
Functions & Applications
Micro-computer time control s witch c ould c onnect a nd b reak th e po wer
of all kinds of electric appliance. The control items includes road lights,
neon light and advertisement light, production equipment and radio &
TV setting which is required to open & stop.
Tech date
Standard operating power
220V/50HZ
Applicable power range160-240V
Switch volume resistive load 25A,
inductive load 20A
Power consumption
The time control range 1 min168
hours, weight 430G
8 groups of switch time, manual/
automatic operation
Counter time mistakes
< 0.5 second/day
environment temprature
-25~60
relative humidity<95%
120X74X58mm
Outline dimension
display screen show symbol explanation
Week
ON
time group No
1
ON
Mo TU WE TH FR SA Su
9 : 30
hour : minute
ON OFF
OR AUTOMARK
K
G
31
6
T
M
icr
o-
c
om
put
e
r t
i
me s
wi
tc
h
OFF
To Next Page
Need help?
General