363325 Rev. 01 Page 7 of 9
If a secondary tag frequency is required (typically not used), determine the frequency of the secondary tag, then select the
following switch setting below.
Secondary Frequency Table
Switch
position
Label Frequency Type
(MHz)
K* 1.8
L* 2.0
M* 2.2
N* 3.25
secondary disabled (default)
P* 4.75
Q* 5.0
R* 5.5
S* 16.5
secondary disabled
* Frequency can not be used in CEPT member countries within Europe
Operation
The Omni verifier is used together with the Checkpoint security system. The Omni verifier is designed to allow an operator to
detect an EAS tag, verify operation of the Checkpoint Counterpoint Deactivator, and deactivate Checkpoint deactivatable
security labels (available only with the Omni Deactivation package).
FIGURE 4
To Next Page
Loading...