Chef CVE662 - Cleaning Your Oven Door (Pyrolytic Models) (Cont.); Replacing Top Door Trim (Pyrolytic); Fitting the Oven Door (Pyrolytic)

Built-in Cooking CLEANING YOUR OVEN DOOR (PYROLYTIC MODELS) 33
• Insert the black bordered glass panel into the upper
position, ensuring the painted surface is facing the
downside as per the diagram below..
Replacing the top door trim
• Hold the top door trim at each side and position it to the
inside edge of the glass.
• Push the trim down with its top edge over the glass panel
until the clip snap in on each side of the trim.
• Push the middle of the trim down to ensure it is straight
and firm against the glass panel.
Fitting the oven door
• Take hold of the oven door with a hand on each side and
with the door at an angle of 30˚, position the recesses at
the bottom of the door onto the hinge arms of the oven.
Let the door slide down the hinge arms as far as it will go.
• Open the door fully to access the hinges.
• Rotate the ‘stirrups’ (see the image below) until
they lock into the hook. The oven door may now
be closed.
stirrup in locked
position
door
column