Chef GHS607S - User Manual

Questions and Answers

M
Melissa LeeJul 30, 2025
What to do if my Chef Cooktop doesn't spark?
- K
  Krystal HughesJul 31, 2025
  If you're not getting a spark when you activate the control knob on your Chef Cooktop, the issue might stem from a few things. First, verify that the electricity supply is connected and switched on, checking the fuses if necessary. Another possibility is a flat battery, which would need replacing. Also, ensure the battery polarity is correct. Lastly, make sure the ignition electrode is clean and dry.
J
Jason BeasleyAug 4, 2025
How to clean discolored stainless steel on my Chef Cooktop?
- C
  charleshallAug 4, 2025
  Discoloration of the stainless steel on your Chef Cooktop can happen if you're using a pot or pan that is too large. Make sure the pot sizes you use are as per the user manual requirements. You can clean the surface with STEEL POWER.
J
jimmy08Aug 8, 2025
How to fix Chef Cooktop burner that won't light?
- J
  Joel EnglishAug 8, 2025
  If your Chef Cooktop burner won't light even though the sparker is working, it could be due to several reasons. First, ensure that the gas supply to the appliance is turned on. Check that the control knob is turned on and that you're turning the correct knob for the burner you want to light. When lighting, hold the knob down for 5 seconds in the 'High' position. Also, make sure the ports in the ignition area are clean and dry, and that the ignition electrode is also clean and dry. Ensure the burner crown is correctly fitted so the spark fires to the receiving point. Lastly, check the injector to ensure it's clear of any foreign material.
D
Dawn HuntAug 12, 2025
Why are the flames on my Chef GHS607S uneven?
- J
  joseph13Aug 12, 2025
  Uneven or lifting flames on your Chef Cooktop can be caused by flame ports that are blocked or wet. Try cleaning or drying the flame ports. Another cause can be a burner cap or crown that is incorrectly fitted, so make sure these components are correctly installed.
L
lthompsonAug 17, 2025
What to do if Chef GHS607S Cooktop flames go out when I release the knob?
- M
  Melissa MurphyAug 17, 2025
  If the flames on your Chef Cooktop aren't staying on when you release the knob, ensure that the knob is set between the 'HIGH' and 'LOW' positions. Also, when lighting, hold the knob down for 5 seconds in the 'High' position to allow the flame safeguard to engage.
T
Tyler MayerAug 21, 2025
Why are my Chef GHS607S Cooktop knobs overheating?
- J
  Jennifer MooreAug 21, 2025
  Benchtop or knobs overheating on your Chef Cooktop can occur if you're using the incorrect cooking pot or pan. Also, check that the pot or pan is centrally located on the burner.
N
Nicole RodriguezAug 25, 2025
Why is my Chef GHS607S Cooktop cooking so slowly?
- Z
  Zachary MoralesAug 26, 2025
  Low heat and slow cooking on your Chef Cooktop can be caused by using an incorrect cooking pot or pan.