Chefman ESPRESSO MACHINE+ - Page 17

13 14
your cappuccino will be ready to enjoy
10. When the brew cycle ends, the unit will go into standby mode and will be preheating in
the background. If no button is pressed within 20 minutes, it will switch to sleep mode.
11. To discard spent grinds, remove the portalter and let cool. Hold the portalter basket
in place by ipping up the portalter basket retention clip to partially cover the lip of the
basket and portalter. Press on the clip with your thumb to hold the basket in place as
you empty the grinds. NOTE: Be sure to clean the froth dispensing tube after every use
following the directions on p. 18.
HOW TO MAKE A LATTE
A latte is a larger coffee drink made with mostly steamed milk and a little espresso. When
using the latte presets, there is no need to manually froth the milk; it will occur automatically.
1. Make sure the unit is plugged in.
2. Turn the unit on using the power switch located on its side.
3. Fill water reservoir as directed on p. 9.
4. Fill the milk reservoir with milk to between the “Min” and “Max” lines and insert it into the
unit. (If the milk reservoir is not on the unit, the latte function will not work.)
5. Set the froth strength to Standard.
6. Place a large heatproof cup or mug on the metal coaster over drip tray. NOTE: Be sure to
use a large mug, especially with a double latte, which can yield as much as 10 oz.
7. Use the silver froth tube lever to position the froth dispensing tube over the cup.
8. Fill the portalter with ground coffee and attach it to the brew head as directed on
pp. 10-12.
9. Choose whether to brew a single or double latte by pressing the appropriate button. The
8. To discard spent grinds, remove the portalter and let it cool. Hold the portalter
basket in place by ipping up the portalter basket retention clip to partially cover the
lip of the basket and portalter. Press on the clip with your thumb to hold the basket in
place as you empty the grinds.
HOW TO MAKE A CAPPUCCINO
A cappuccino is a delicious beverage made with equal parts espresso, steamed milk, and
froth. When using the cappuccino presets, there is no need to manually froth the milk; it will
occur automatically.
1. Make sure the unit is plugged in.
2. Turn the unit on using the power switch located on its side.
3. Fill the water reservoir as directed on p. 9.
4. Fill the milk reservoir with milk between the “Min” and “Max” lines and insert it onto the
unit. (If the milk reservoir is not on the unit, the cappuccino function will not work.)
5. Set the froth strength to Standard.
6. Place a heatproof cup or mug on the metal coaster over the drip tray.
7. Use the silver froth tube lever to position the froth dispensing tube over the cup.
8. Fill the portalter with ground coffee and attach it to the brew head as directed on
pp. 10-12.
9. Choose whether to brew a single or double cappuccino by pressing the appropriate
button. The button will blink to signify the unit is preheating. The button will turn solid
during the brew cycle. When brewing is complete, the unit will beep three times, and
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS