11
HOW TO HOT FROTH AND BREW
(*Requires glass frothing mug.)
1. Lift up water tank lid to place water level indicator inside.
2. Paying attention to water levels, pour in desired amount of water.
NOTE: For best results, we recommend 8 oz filtered water.
3. Plug in
Froth + Brew™
.
NOTE: All buttons will blink once, indicating
Froth + Brew™
is on.
4. To open brew chamber, push lid release button.
5. Add K-Cup
®
or coffee grounds. (Refer back to page 7-8).
6. Push down brew chamber lid to close.
7. Pour desired amount of milk into glass frothing mug. Do not fill above
LATTE/MAX line.
8. Place frothing mug under drip spout.
9. Press Brew button.
NOTE: Brew button will illuminate, and Hot Froth will blink.
OPERATING INSTRUCTIONS
To Next Page
Loading...
Need help?
General
