6
Handle Tool
Always use the handle tool when removing the frying basket, skewer rack, baking cage,
and rotisserie tool. Handle tool #1, shown in the illustration below, is used to remove
the frying basket. Handle tool #2, shown in the illustration below, is used to remove the
skewer rack, baking cage, and rotisserie tool.
Clip the handle into the corresponding slot on the front of the frying basket or on the rod
ends on both sides of the rotisserie tool, skewer rack, and baking cage, as shown in the
illustrations below.
Handle Tool #1
Handle Tool #2
Removing Frying Basket
Removing
Skewer Rack
Removing
Baking Rack
Removing
Rotisserie Tool
To Next Page
Loading...