ChemDry Powerbase 10 - User Manual

23 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

MNL36414TCB3CD

Rev. 00 (5-17)

Model No.:

36414TCB3CD – 10 gal (38 liter) Extractor

Manufactured by Kleenrite

KLEENRITE

1122 MAPLE STREET

MADERA CA 93637 U.S.A.

FAX: 1-559-673-5725

CUSTOMER SERVICE: 1-800-241-4865

Operator and Parts Manual

Powerbase 10

CARPET AND UPHOLSTERY CLEANER

CAUTION: Read the instruction manual

before using the appliance.

Table of Contents

Questions and Answers

J
Jonathan DavisAug 6, 2025
What to do if ChemDry Powerbase 10 Ultrasonic Jewelry Cleaner has poor solution pick-up?
- A
  Andrea SteinAug 6, 2025
  If you're experiencing poor solution pick-up with your ChemDry Ultrasonic Jewelry Cleaner, several factors could be the cause. First, ensure the recovery tank drain valve is closed. A defective recovery tank lid gasket can also cause this, so consider replacing it. Check the float shut-off screen for clogs and clean it if necessary. Make sure all vacuum hose connections are secure. If the vacuum hose is defective, replace it. Finally, check the vacuum filter for clogs and clean the filter screen.
A
aevansAug 16, 2025
Why is there uneven or no spray from my ChemDry Powerbase 10?
- C
  Corey BrownAug 16, 2025
  Uneven or no spray from your ChemDry Ultrasonic Jewelry Cleaner can be due to several reasons. The spray tips might be plugged, requiring cleaning or replacement. The spray tip size or spray angle could be incorrect; replace them with the proper tips. Worn spray tips can also cause this issue, so replace them if needed. Check if the solution tank is low or empty and refill it if necessary.
H
Heather BishopAug 27, 2025
What to do if ChemDry Powerbase 10 solution pump does not operate?
- E
  Edwin BennettAug 27, 2025
  If the solution pump on your ChemDry Ultrasonic Jewelry Cleaner isn't working, make sure the trigger on the wand is pulled. Also, ensure the quick couplers are fully engaged by connecting them properly.

Summary

IMPORTANT SAFETY INSTRUCTIONS

OPERATION

MACHINE DATA

Fields for recording machine model, installation date, and serial number for future reference.

OPERATING SAFETY AND GROUNDING

Detailed safety precautions, warnings, and grounding instructions for safe machine operation.

MACHINE COMPONENTS AND SETUP

Identifies machine parts and provides instructions for initial setup and connection.

CLEANING OPERATIONS

Covers pre-operation checks, heating, carpet cleaning, accessory use, and operational tips.

TANK MANAGEMENT AND MAINTENANCE

Procedures for draining tanks, freeze protection, and basic machine maintenance tasks.

STORING AND STOCK ITEMS

Guidelines for proper machine storage and a list of recommended spare parts.

TROUBLE SHOOTING

SPECIFICATIONS

ELECTRICAL DIAGRAM

PARTS LIST

WARRANTY POLICY

WARRANTY COVERAGE AND CLAIMS

Details warranty coverage, replacement procedures, and how to obtain return authorization.

WARRANTY REGISTRATION

Information and fields for registering the machine's warranty for coverage.

ChemDry Powerbase 10 Specifications

General

Model	Powerbase 10
Category	Ultrasonic Jewelry Cleaner
Brand	ChemDry
Ultrasonic Frequency	42 kHz
Tank Material	Stainless Steel
Power Supply	AC 220-240V