EasyManua.ls Logo

Chemex Chettle - Technical Data; Power Cord and Plug Safety

Chemex Chettle
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This symbol alerts you to
important operating and
service instructions.
This symbol alerts you to the risk of fire
or electric shock in the accompanying
message.
Technical Data
Rated Voltage: 120 VAC,
~
60Hz
Rated Current: 10A
Rated Power: 1200w
• Unplug from outlet before cleaning, allow unit to cool
before putting on or taking off parts to clean the appliance.
• Using your kettle on a stove top and then returning it to use
on the induction base may cause base not to function properly.
• Do not insert any objects into slots or holes of the kettle or base.
• Do not touch the metal bottom of the kettle when removed
from induction base in case it is still hot.
• If the kettle is used on the stove top, this may adversely
affect the functionality of the kettle when used with the
induction base.
• By ignoring the safety instructions the manufacturer
cannot be held responsible for the damage.
Save these Instructions.
Short Power-Supply Cord Instruction
a) A short power-supply cord is to be provided to reduce
risks resulting from becoming entangled in or tripping
over a longer cord.
b) Longer extension cords are available and may be used if
care is exercised in their use.
c) If a long extension cord is used:
1) The marked electrical rating of the detachable
power-supply cord or extension cord should be at
least as great as the electrical rating of the appliance;
2) The longer cord should be arranged so that it will
not drape over the counter top or table top where it
can be pulled on by children or tripped over.
Polarized plug
This appliance has a polarized plug (one blade is wider
than the other), To reduce the risk of electric shock, this
plug is intended to fit into a polarized outlet only one way,
If the plug does not fit fully into the outlet, reverse the plug,
If it still does not fit, contact a qualified electrician, Do not
attempt to modify the plug in any way.
SHOCK HAZARD
ONLY FOR USE WITH 120V AC OUTLET.
DO NOT USE ADAPTER.
FAILURE TO FOLLOW THESE INSTRUCTIONS CAN
RESULT IN DEATH, FIRE OR ELECTRICAL SHOCK.
WARNING, TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY
WARNING!
WARNING!
RISK OF FIRE OR ELECTRIC SHOCK
DO NOT OPEN