9
Supplier’s Federal Identification Code: 11815 TM-G704B_SR; Rev.: A
Date: 11/06/13
DCR# 13-1687
Seller warrants the goods conform to applicable specifications and drawings and will be manufactured and inspected according to generally accepted practices of
companies manufacturing industrial or aerospace fasteners. In the event of any breach of the foregoing warranty, Buyer’s sole remedy shall be to return defective
goods (after receiving authorization from Seller) for replacement or refund of the purchase price, at the Seller’s option. Seller agrees to any freight costs in
connection with the return of any defective goods, but any costs relating to removal of the defective or nonconforming goods or installation of replacement goods
shall be Buyer’s responsibility. SELLER’S WARRANTY DOES NOT APPLY WHEN ANY PHYSICAL OR CHEMICAL CHANGE IN THE FORM OF THE
PRODUCT IS MADE BY BUYER.
THE FOREGOING EXPRESS WARRANTY AND REMEDY ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES AND REMEDIES;
ANY IMPLIED WARRANTY AS TO QUALITY, FITNESS FOR PURPOSE, OR MERCHANTABILITY IS HEREBY SPECIFICALLY DISCLAIMED AND
EXCLUDED BY SELLER.
THIS WARRANTY IS VOID IF SELLER IS NOT NOTIFIED IN WRITING OF ANY REJECTION OF THE GOODS WITHIN ONE
(1) YEAR AFTER INITIAL USE BY BUYER OF ANY POWER RIVETER OR NINETY (90) DAYS AFTER INITIAL USE OF ANY OTHER PRODUCT.
Seller shall not be liable under any circumstances for incidental, special or consequential damages arising in whole or in part from any breach by Seller, AND SUCH
INCIDENTAL
SPECIAL
OR CONSE
UENTIAL DAMAGES ARE HEREBY EXPRESSLY EXCLUDED.
G704B-SR PULLING HEADS
Pulling Heads are not furnished with riveter and must be ordered separately; see Tool Sheet for details on service and about all the
fastener capabilities of each pulling head.
1. On the first stroke. 2. Nominal and oversize. 3. No 3/16 aluminum, alloy steel and monel only. 4. Serrated stems only.
Extensions
Extensions are offered in order to extend the reach of the pulling head even deeper into narrow access areas.
Extension Number Length (In) National Stock No.
704A12-2 2.0 5130-01-145-0206
704A12-4 4.0 5130-01-145-0207
704A12-6 6.0 5130-01-145-0208
704A12-12 12.0 5130-01-178-0331
CE CERTIFICATION
G704B, the base model and power unit converted into this extended version is a CE certified tool (see certification on the back).
For more details about G704B see TM-G704B.
Pulling Head Type Adapter Rivet Rivet Diameters Maximum Grip
1
H701B-456
H747-456
Straight -
CherryMAX Bulb 1/8, 5/32, 3/16
2,3
All
CherryMAX “AB” 1/8, 5/32, 3/16
-4
MBC L/C 1/8, 5/32, 3/16 -4
1
H753A-456 Right Angle -
CherryMAX Bulb 1/8, 5/32, 3/16
2,3
All
CherryMAX “AB” 1/8, 5/32, 3/16
-4
H781-456 Offset -
CherryMAX Bulb 1/8, 5/32, 3/16
2,3
All
CherryMAX “AB” 1/8, 5/32, 3/16
-4
H9015-Series Straight 704A9 MS
4
3/32, 1/8, 5/32, 3/16 All
H955-Series Straight - CherryLock “A” 3/32, 1/8, 5/32, 3/16
3
-4
1
H782 Straight -
CherryMAX Bulb 1/8, 5/32, 3/16
2,3
All
CherryMAX “AB” 1/8, 5/32, 3/16
3
-4
1
MBC L/C 1/8, 5/32, 3/16 -4
1
LOCTITE
is a registered trademark of Henkel Corporation
DEXRON
®
is a registered trademark of GM Corporation.
PARKER
®
is a trademark of Parker Hannifin Corporation
LUBRRIPLATE
®
is a trademark of Fiske Brothers Refining Co.
WARRANTY
For more information
lease contact our Technical Services De
artment at Tel. 714-850-6022
To Next Page
Loading...