Training Center of After-Sales Department Chery International
12. Instrument cluster
192
2. Function description
Display priority level
If the instrument receives signals from both DVD and steering wheel button at the same
time, the signal from steering wheel will be shielded, while the CAN signal from DVD will
be adopted.
[Radio frequency, mode and volume], outer temperature and SPT mode will be displayed
on the audio information zone on the instrument. The priority level is as follows: SPT mode,
[Volume/Mode/Radio frequency] (depending on the audio signal display) and outer
temperature. They will not be indicated in a cycle; namely, the information of a lower
priority level will be covered by the one of a higher level.]
To Next Page
Loading...
