Training Center of After-Sales Department Chery International
2. PEPS system
34
Emergency engine start
If the smart key voltage is low or the radio frequency signal is seriously interfered, the passive start
system will not work normally; at this moment, the system provides a standby engine startup
means:
1. Flatly put the key into the bottom of rear cup holder with the key front side up, and do not
depress the brake pedal (for CVT vehicle);
2. Press the starting switch (do not depress the brake pedal etc.), and the power supply mode will
be changed to IGN, with following words indicated on the instrument: “The verification is successful
and now the engine can be started”;
3. Depress the brake pedal (for CVT vehicle), and press the starting switch to start the engine.
1. Cup holder;
2. Armrest box;
3. “Standby ignition key location symbol” on
the bottom of the rear cup holder;
4. Smart key.
1 2 3 4
Front side up
3. System operation
To Next Page
Loading...
