Training Center of After-Sales Department Chery International
2. PEPS system
53
5. Notices in operation and maintenance
DTC Description on the fault code Definition of
category of fault
Type of fault
B1508-00 ACC circuit Anomaly Input fault
B1509-00 Brake signal Anomaly Input fault
B150A-00 Vehicle speed signal Anomaly Input fault
B1510-00 Wheel speed signal Anomaly Input fault
B1514-00 Starting power supply input anomaly Anomaly Input fault
B1515-45 Failure of ROM check sum Overhigh current Input fault
B1516-19 HUS overload Overhigh current Input fault
B1517-23 HUS switch adhesion Low signal level Input fault
U0073-88 Control module communication bus off Bus off Network fault
U0100-87 Fault of communication with EMS Message lost Network fault
U0101-87 Fault of communication with TCM Message lost Network fault
U0129-87 Fault of communication with BSM Message lost Network fault
U0140-87 Fault of communication with BCM Message lost Network fault
U1300-55 Software configuration error Configuration error Internal fault
Description on fault codes of PEPS system
To Next Page
Loading...
