Training Center of After-Sales Department Chery International
3. Cruise control system
59
4. In the cruise mode, each short press RES/+ (≤0.5s) (during pressing, the cruise indicator
lamp will be lit), vehicle cruising speed will increase 2km/h. In the cruise mode, long press
RES/+ (≥0.5s) (during pressing, the cruise indicator lamp will be lit), and the vehicle speed will
increase constantly. Release RES/+, vehicle speed will stop increase, and vehicle runs at the
speed set at releasing RES/+ (It is not recommended to press RES/+ long continuously, for this
may lead to a constant increase of vehicle speed, which is liable to cause accidents).
5. In the cruise mode, each short press RES/- (≤ 0.5s) (during pressing, the cruise indicator
lamp will be lit), vehicle cruising speed will decrease 2km/h. In the cruise mode, long press
RES/+ (≥ 0.5s) (during pressing, the cruise indicator lamp will be lit), and the vehicle speed will
decrease constantly. Release RES/-, vehicle speed will stop decrease, and vehicle runs at the
speed set at releasing RES/-.
6. In the cruise mode, depress brake pedal, and the cruise indicator lamp on instrument cluster
will flash (pre-cruise, that’s normal), and the vehicle speed will decrease. If vehicle speed is
lower than 40km/h, release brake pedal, press RES/+, and the vehicle will restore the cruise
mode before depress brake pedal, with the cruise indicator lamp on the instrument lit long.
Function description of cruise control system
2. Working principle
To Next Page
Loading...
