EasyManua.ls Logo

Chesney's BEAUMONT User Manual

Chesney's BEAUMONT
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CHESNEY’S
GAS EFFECT STOVES
STANDARD & LARGE
INSTALLATION & USER MANUAL
chesneys.co.uk
Version 005. Sept 2016
Question and Answer IconNeed help?

Do you have a question about the Chesney's BEAUMONT and is the answer not in the manual?

Chesney's BEAUMONT Specifications

General IconGeneral
Fuel TypeWood
Heat Output5kW
MaterialCast Iron
Flue OutletTop or Rear
StyleTraditional
Energy Efficiency ClassA
Flue Outlet Diameter125mm

Summary

Unpacking

Technical Data

Installation Parameters

Construction Information

The Builders Opening

Details requirements for the builders opening and chimney breast construction materials.

Appliance Distances and Clearances

Specifies minimum distances to combustible and non-combustible materials around the appliance.

Appliance Details

Preparing the Appliance for Installation

Installation

Appliance Fixing

Describes how the appliance is positioned and secured, noting it's a free-standing unit.

Flue System Connection

Details the connection of the appliance to a conventional Class 1 chimney system.

Gas Supply Connection

Outlines requirements for gas supply, isolation valves, and connection points.

Interior Panel Installation

Provides instructions for fitting or replacing the interior panel boards within the appliance.

Burner Assembly Installation

Guides the installer on how to fit the burner assembly correctly into the appliance.

Gas Soundness Testing

Explains the procedure for performing gas soundness tests on the installation.

Gas Pressure Checks

Details how to check the appliance's gas inlet and working pressure.

Placement of Logs & Embers

Embers Placement Procedure

Instructs on how to evenly spread embers in the burner tray.

Standard Stove Log Set Placement

Details the placement of log set components for the standard gas stove.

Large Stove Log Base Fitting

Guides on fitting the log support channel and retainer for the large gas stove.

Large Stove Log Set Placement

Provides instructions for placing log set components for the large gas stoves.

Commissioning the Fire Unit

Initial Appliance Lighting

Describes the procedure for lighting the appliance for the first time, including initial burn-off.

Spillage Testing

Details the process for conducting a spillage test to check chimney draw.

Flame Stability Verification

Explains how to check the stability of the main and pilot burner flames.

Aeration Note

Notes that appliance aeration is factory set and should not be adjusted.

Briefing & Handover to the Customer

Servicing & Maintenance

Exchangeable Components List

Lists components that can be exchanged as part of servicing or repair.

Annual Maintenance Procedures

Outlines the steps for carrying out annual servicing and safety precautions.

Flue and Chimney Inspection

Details annual inspection requirements for the flue and chimney system.

Glass Seal Replacement

Provides instructions on how to replace the stove door seal.

Fault Finding

User Instructions

General Operation and Safety

Covers general safety rules, operating precautions, and clearances for the appliance.

Fireguard Recommendations

Recommends using a guard for young children, the elderly, or infirm persons.

Ventilation Requirements

Specifies ventilation needs for GB appliances over 7kW and checking for obstructions.

Cleaning Procedures

Paintwork Cleaning

Details how to clean the appliance's paintwork using a soft dry brush or vacuum.

Glass Cleaning

Provides guidance on cleaning the appliance glass with a mild cleaner and soft cloth.

Stainless Steel Panel Cleaning

Explains how to clean the stainless steel sides, noting they will patinate over time.

Fuel Bed Component Cleaning

Advises on safety equipment needed for cleaning logs and embers.

Control System Information

Handset Basic Operation

Explains how to turn on the Fire Control and unlock the handset for operation.

Handset Display and Functions

Describes the features and indicators on the remote control handset's display.

Appliance Operating Modes

Covers lighting, adjusting flame, turning off, and restarting the appliance.

Advanced Control Settings and Modes

Details setting time, date, temperature display, and additional functions.

Snooze Mode Setup

Explains how to set a timed period to turn off the fire.

Thermostatic Mode Operation

Describes how to set and use the thermostat for automatic room temperature control.

Installer Check List

Dealer and Installer Information

Annual Service Record

Chesney's Warranty Registration

Related product manuals