Removing
and Installing
Your
Rear Window
The
rear
window of your vehicle is removable. This
allows
you
to open the back opening all the way or to
replace the window
if
it becomes deteriorated.
To
remove the
rear
window:
1.
Open the rear gate
all
the way.
2.
Unfasten the canvas flaps at the lower corners
of
the rear window
to
uncover the zipper pull.
3.
Unzip the rear window.
4.
Hang the rear window down
so
it hangs outside
of
5.
Push the clip on the driver’s side of the rear window
frame (see illustration above) and pull the bar
rearward. Then slide the bar to the left to release the
passenger’s side.
the vehicle.
Reverse
the
steps
to
install the rear window. Make sure
that the window is completely closed before driving.
2-44
To Next Page