7.
Don’t let the other end
touch metal. Connect it
to the positive
(+)
terminal
of
the good
battery. Use a remote
positive
(+)
terminal if
the vehicle has one.
8.
Now
connect the
black negative
(-)
cable
to the good battery’s
negative
(-)
terminal.
Don’t let the other end
touch anything until the
next step.
,.
i.
9.
The other end of the negative
(-)
cable doesn’t go
to the dead battery. It goes to a heavy unpainted
metal part
on
the engine
of
the vehicle with the
dead battery. Attach the cable at least
18
inches
(45
cm) away from the dead battery, but not near
engine parts that move. The electrical connection is
just
as
good there, but the chance of sparks getting
back to the battery is much less.
the engine for a while.
10.
Now
start
the
vehicle with the good battery and run
5-6
To Next Page
Loading...
