4.
Remove all the wheel
nuts and take
off
the
flat
tire.
Remove any rust or dirt
from the wheel bolts,
mounting surfaces and
spare
wheel.
Rust or dirt on the wheel, or on me parts to
which
it is
fastened, can make the wheel nuts
become loose after
a
time. The wheel could come
off and cause an accident. When you change
a
wheel, remove any rust or dirt from the places
where the wheel attaches to the vehicle. In an
emergency, you can use
a
cloth or a paper towel
to do this; but be sure to use
a
scraper or wire
brush later, if you need to, to get all the rust or
dirt
off.
--.
6.
Place the
spare
on the wheel mounting surface.
5-28
To Next Page
Loading...
