1
Long Trip/Highway Maintenance Schedule
I
Inspect the locking front hubs (if equipped) for correct operation (or every
3
months, whichever occurs first). Repair or replace if necessary.
0
Inspect the valve lash and adjust if necessary.
An Emission Control Service.
0
Check engine idle speed and adjust
it
to underhood label specifications.
0
Inspect propeller shafts and u-joints for looseness and damage (or every
An Emission
Control
Service.
(See footnote?.)
15
months, whichever occurs first). Inspect more frequently
if
used off-road
or for pulling a trailer. Tighten u-joint flange bolts if necessary.
22,500
Miles
(37
500 km)
0
Change engine
oil
and filter (or every
7.5
months, whichever occurs first).
Rotate tires. See “Tire Inspection and Rotation” in the Index for proper
0
Inspect the locking front hubs (if equipped) for correct operation (or every
An Emission Control Service.
rotation pattern and additional information. (See footnote
+.)
3
months, whichever occurs first). Repair or replace if necessary.
I
DATE
I
30,000
Miles
(50 000
km)
0
Change engine oil and filter (or every
7.5
months, whichever occurs first).
An Emission
Control
Service.
7-33