Vehicle Care 10-47
License Plate Lamp
To replace one of these bulbs:
1. Unclip the license plate lamp
from the fascia opening.
2. Pull the license plate lamp down
through the fascia opening.
3. Turn the bulb socket
counterclockwise and pull the
bulb straight out of the lamp
socket.
4. Install the new bulb.
5. Push the bulb straight into the
socket and turn clockwise to
reinstall.
6. Reinstall the license plate lamp
by lifting it through the fascia
opening until the clip is in place.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Front Parking and
Turn Signal Lamp
(Except ZL1)
T20
Front Park and Turn
Signal Lamp (ZL1)
3457NAK
Low-Beam
Headlamp
H11LL
High-Beam
Headlamp
H9LL
License Plate Lamp W5WLL
Rear Stoplamps T20
Rear Taillamp 7444LL
Exterior Lamp
Bulb
Number
Rear Turn
Signal Lamp
W21/5W
For replacement bulbs not listed
here, contact your dealer.