Need help?Do you have a question about the Chevrolet Impala SS and is the answer not in the manual?
General| Brand | Chevrolet |
|---|---|
| Model | Impala SS |
| Category | Automobile |
| Language | English |
Replacing Stealth Brake Bolt and Metering Bolt for improved braking performance.
Detailed steps to resolve the metering bolt issue causing brake delay.
Replacing lower body bushings with improved aftermarket units for better ride quality.
Procedure for replacing upper body bushings, requiring frame separation.
Steps to replace front coil springs, noting difficulty.
Replacing rear control arms, including lower and upper components.
Guide for replacing front and rear shock absorbers.
Procedure for removing air from the cooling system after service.
Guide to flushing the cooling system and replacing coolant.
Step-by-step guide for replacing the engine thermostat.
Detailed instructions for replacing the vehicle's water pump.
Procedures for installing and converting the Opti-Spark ignition system.
General guide to changing spark plugs and wires.
Replacing and rebuilding the power antenna assembly.
Instructions for disabling the vehicle's Pass Key security system.
Procedure for disabling the secondary AIR pump system.
Guide for replacing the Exhaust Gas Recirculation (EGR) valve.
Steps for replacing the vehicle's fuel filter.
Procedures for removing the fuel pump and repairing the sender.
Procedure for replacing the engine's air filter.
Guide for changing the differential fluid.
Procedures for changing engine oil and resetting the service light.
Replacing the PCV valve and oxygen sensors.
Installing a custom bow tie emblem on the vehicle's grill.
Steps for bypassing the throttle body for performance.
Explains exhaust system principles and performance enhancement strategies.
Guidance on selecting header primary pipe diameters for optimal performance.
Tips on choosing mufflers to avoid power loss and improve flow.
Installing high-flow filters and basic intake modifications.
Removing intake system baffles for improved airflow.
A do-it-yourself intake modification using PVC components.
Modifying the stock air box by drilling holes for better airflow.
Procedure for installing a Z28 instrument cluster into the vehicle.
Explains the operation and diagnostic procedures for the ABITS distributor system.
Identifies and describes the components of the ABITS system.
Details ABITS system operation, signals, and common fault codes.
To Next Page