Vehicle Care 10-31
2. Turn Signal Lamp
3. Stop Lamp/Taillamp
4. Sidemarker Lamp
To replace one of these bulbs:
1. Open the trunk.
2. Remove the two screws, which
secure the taillamp assembly.
3. Remove the taillamp assembly
by pulling it straight back until
the two posts disengage from
the grommets.
4. Remove the bulb socket from
the taillamp assembly by turning
it counterclockwise.
5. Remove the bulb by pulling it
straight out.
6. Install a new bulb into the bulb
socket.
7. Install the bulb socket into the
taillamp assembly by turning it
clockwise.
8. Install the taillamp assembly and
tighten the two screws.
License Plate Lamp
Lamp Assembly
To Next Page
