Chevrolet Spark Owner Manual (GMNA-Localizing-U.S./Canada-14622955) -
2021 - CRC - 8/17/20
Vehicle Care 183
3. Remove the bulb from the bulb socket
by pulling it straight out.
4. Install the new bulb in the bulb socket.
5. Install the bulb socket into the headlamp
assembly by turning clockwise.
Front Turn Signal/Parking Lamps
To replace a front turn signal bulb:
1. Open the hood. See Hood 0 163.
2. Remove the turn signal lamp bulb socket
from the headlamp assembly by turning
counterclockwise.
3. Remove the bulb from the bulb socket
by pulling it straight out.
4. Install the new bulb into the socket by
pressing it in.
5. Install the bulb socket into the headlamp
assembly by turning clockwise.
Projection Headlamp
1. Low-Beam Headlamp
2. High-Beam Headlamp
High/Low-Beam Headlamp
To replace a headlamp bulb:
1. Open the hood. See Hood 0 163.
2. For the driver side bulb, remove the
washer funnel by turning it
counterclockwise and pulling it
straight out.
To Next Page
Loading...
