Caution
This vehicle was designed having
in mind, among other aspects, the
total safety of its passengers.
Therefore, its assembly on the
manufacture line uses bolts with
thread locking adhesive. If bolts
are removed for any reason, then
they must be replaced by new
genuine bolts with the correct
code. Furthermore, it is also
essential to effectively clean the
piece which is attached to the bolt
with thread locking adhesive, in
order to ensure a perfect torque
and an effective physical-chemical
reaction of the locking chemical
compounds when a new bolt is
used. This way, we strongly
recommend that the vehicle safety
systems (brake, seats,
suspension, safety belts, etc.) as
well as services that indirectly
affect such systems are always
performed by a Chevrolet dealer.
For further details, contact a
Chevrolet dealer of your choice.
Lifting the vehicle
The illustration shows where the
supports of a hoist or jack must be
placed.
Note
If the elevators support points or
jacks are metallic, a rubber
protection must be used to avoid
vehicle damages.
Battery disconnect switch
Disconnect:
1. Open the bonnet.
2. Certify all electric systems are
turned off, like audio systems,
headlights, anti-theft alarm and
accessories. Beware the ignition
is switched off.
3. Close all vehicle doors and do not
activate anti-theft alarm.
4. Remove the battery cover (if
equipped).
To Next Page