Chevrolet Spin - Page 187

VVeehhiiccllee ccaarree 118877
4. Insert the bulb holder in the bulb
housing and rotate it clockwise.
5. Insert the bulb housing and
secure it using a screwdriver.
IInntteerriioorr lliigghhttss
CCoouurrtteessyy lliigghhtt
1. To remove it, prise the opposite
side of the lamp switch using a flat
blade screwdriver.
Be careful not to scratch the
courtesy lights.
2. Remove the bulb.
3. Replace the bulb.
4. Reinstall the lamp assembly.
LLooaadd ccoommppaarrttmmeenntt lliigghhtt
1. Prise the lamp out with a
screwdriver.
2. Press the bulb slightly towards the
spring clip and remove it.
3. Insert the new bulb.
4. Install the lamp.
IInnssttrruummeenntt ppaanneell
iilllluummiinnaattiioonn
Have bulbs replaced by a Chevrolet
dealer.