EasyManua.ls Logo

Chevrolet Spin - Page 207

Chevrolet Spin
234 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VVeehhiiccllee ccaarree 220077
The towing eye is stowed in the tool
kit under the spare wheel in the trunk
compartment of your vehicle.
The hole to fix the towing eye is
located at the front right side and at
the rear right side of the bumpers.
NNoottee
The lower parts of the engine, such
as engine supports, skid plate and
control arm, are not suitable as
Disengage the cap at the bottom and
remove downward.
Screw in the towing eye as far as it will
go until it stops in a horizontal
position. It is easier if the lug wrench
is used for leverage.
The displacement of the vehicle by
the towing eye must be in a straight
line and for short distances on paved
grounds.
backing for the lifting of the vehicle.
These parts may be deformed or
even damaged, compromising their
functionality.