Driver Information Center.
inserted into the ignition switch.
The trip computer is located in the
Driver Information Center (DIC).
The trip computer provides the driver
with driving information such as
average speed, driving distance for
remaining fuel, average consumption
and driving time.
To operate the trip computer, press
the MENU button in the turn signal
lever.
Select the upper display by pressing
the MENU button until it blinks twice.
Each time you turn the knob in the
turn signal lever clockwise, the mode
changes in the following order:
Average consumption → Driving
distance for remaining fuel → Average
speed → Driving time.
Some modes can be reset by
pressing SET/CLR button for a few
seconds.