Chevrolet Spin - Page 79

Lighting 79
To change the headlights from high
beam to low beam, pull or push the
turn signal lever.
Control indicator P3 70
9 Warning
Always switch the high beam
headlights to low beam when you
approach oncoming vehicles or
when other vehicles approach.
High beam headlights can
temporarily dazzle other drivers,
which could result in a collision.
Headlight flash
To activate the headlight flash, the
headlights have to be turned on.
To activate the headlight flash, pull
the lever.
The lever will return to its normal
position when you release it. The high
beam lamps will stay on as long as
you hold the lever towards you.
Hazard warning flashers
Operated with the ¨ button.
On = Press ¨.
Off = Press ¨
again.
When the hazard warning flashers
are activated, the red surface on the
button also flashes.
In case of deployment of the airbag,
the hazard warning flashers activate
automatically.
To turn off the flashers, press the
button again.
Turn and lane-change
signals
Right = Lever down
Left = Lever up