Instruments and Controls 5-33
The Charge Level Preference
should be configured to match the
electrical current rating for the AC
outlet that the charge cord is
connected to. The Charge Level
Preference settings are:
.
Maximum: Limits AC current to
12 Amps
.
Reduced: Limits AC current to
8 Amps
The Charge Level Preference
settings are not directly related to
the Charge Level Button on the
charge cord. The vehicle will adhere
to the setting that minimizes the AC
current used to charge the vehicle.
The Charge Level Preference
setting will return to Maximum
each time the cord has been
disconnected from the vehicle
for an extended period of time.
The Charge Level Preference
setting can be changed at any time
while the center stack display is
operable.
Charge Mode Selection
From the Charge Mode Status
screen, press Change
Charge Mode.
Select one option:
.
Immediately upon plug in.
.
Delayed based on
departure time.
.
Delayed based on electric rates
& departure time.