Climate Controls 161
1. Open the glove box door (1)
completely. Grasp the edges of
the side instrument panel
trim (2) and pull to remove from
the instrument panel.
2. Remove the five screws and
pull the entire glove box toward
you to release completely. The
service door can now be
accessed.
3. Release the retainer clips
holding the service door. Open
the service door and remove
the old filter.
4. Install the new air filter.
5. Close the service door and
attach the retainer clips.
6. Reverse the steps to reinstall
the glove box.
See your dealer if additional
assistance is needed.
To Next Page
Loading...
