Driving and Operating 207
3. Open the rear hatch. Open the
left storage compartment door
and remove the charge cord.
4. Plug the charge cord into the
electrical outlet. See Electrical
Requirements for Battery
Charging 0 220. Verify the
charge cord status. See
Charge Cord 0 213.
5. Plug in the vehicle plug of the
charge cord into the charge
port on the vehicle. Verify that
the charging status indicator
illuminates on top of the
instrument panel and an
audible beep occurs. See
Charging Status
Feedback 0 208.
6. To arm the charge cord theft
alert, lock the vehicle with the
RKE transmitter. To disable this
feature, see “Charge Cord
Theft Alert” in Vehicle
Personalization 0 139.
End Charge
1. Unlock the vehicle with the
RKE transmitter to disarm the
charge cord theft alert.
2. Unplug the vehicle plug of the
charge cord from the vehicle.
3. Close the charge port door by
pressing firmly on the rearward
edge of the door surface.
4. Unplug the charge cord from
the electrical outlet.
5. Place the charge cord into the
storage compartment.
To Next Page
Loading...
