7
FABRIC FACTS AND LABELS:
Every fabric is different and should be treated accordingly. The
label inside clothing or linens should recommend fabric care
instructions that include ironing treatment. As a general rule,
these instructions should be followed. If the fabric is a blend,
use a low temperature setting. If you do not know what the
content of the fabric is, use the lowest temperature first and
test on an inside seam.
PREPARE TO IRON:
1. Cover your ironing board with a padded, heat-resistant
cover. Brush or wipe off any dust, dirt, or debris so it
doesn’t transfer to clothing.
2. To set the height of the ironing board, stand with your
elbows bent at right angles; then drop your hands slightly
so that your arms are in a comfortable position. Set the
height of your ironing board to this height.
Tips for Best Ironing Results
POSITION SENSING/AUTO SHUTOFF
The iron will turn off automatically when left in the following
positions. The Auto Shutoff time varies based on the iron’s position.
NOTE: Tilting the iron more than 30 degrees will reset the
Auto Shutoff sensor.
IRON POSITION MOTIONLESS TIME
Resting on soleplate
60 seconds
Resting on either side
60 seconds
Resting on heel
30 minutes
To Next Page
Loading...
