Chicago Electric 93765

Questions and Answers

J
Julia PearsonAug 17, 2025
What to do if the image on the screen is dark when using the Chicago Electric Analytical Instruments camera in a pipe?
- D
  Daniel CarterAug 17, 2025
  If the image on the screen is dark when the Chicago Electric Analytical Instruments camera is in a pipe, try the following: * Turn the LED on via the monitor. * Adjust the LED dimmer. * Use a ball protector with the camera to keep the lens above any sludge. * Clean the lens and LEDs. * Ensure all cable connections are secure.
F
florestylerAug 19, 2025
Why does my Chicago Electric 93765 monitor not work?
- J
  Joseph HughesAug 20, 2025
  If the Chicago Electric Analytical Instruments monitor does not work, you can try the following: 1. Recharge or replace the battery. 2. Use the line power adapter. 3. If the issue persists, have a qualified technician service the monitor.
C
Cody OdomAug 22, 2025
How to fix a rolling, shrunk, or unstable picture on a Chicago Electric 93765 Analytical Instruments system?
- T
  Tiffany CrawfordAug 22, 2025
  If the system of your Chicago Electric Analytical Instruments displays a rolling, shrunk, or unstable picture, you can try the following: * Check all connections. * Fully charge the battery. * If the issue persists, have a qualified service technician check for a defective battery or other defective components.
J
Joshua FlemingAug 25, 2025
What to do if the screen on my Chicago Electric 93765 Analytical Instruments monitor is white?
- M
  Matthew MontgomeryAug 26, 2025
  If the screen on your Chicago Electric Analytical Instruments monitor is white, adjust the contrast and brightness settings.
C
Caitlin WrightAug 27, 2025
What to do if my Chicago Electric 93765 Analytical Instruments monitor does not work with the battery?
- J
  Jose MorganAug 27, 2025
  If the Chicago Electric Analytical Instruments monitor does not work with the battery, try recharging or replacing the battery. If that doesn't work, use the line power adapter.
B
brittanywoodAug 30, 2025
Why are the camera LEDs not lit on my Chicago Electric Analytical Instruments?
- N
  nbellAug 30, 2025
  If the camera LEDs on your Chicago Electric Analytical Instruments are not lit, consider the following: * The LEDs may not be clearly visible in a brightly lit room. Try pointing the camera at a monitor while it's on to see if the LEDs are actually lit. * Adjust the LED Dimmer to change the LED brightness.
J
Jon BennettSep 2, 2025
What to do if the monitor works, but the LED doesn't on my Chicago Electric Analytical Instruments?
- M
  Melissa DouglasSep 2, 2025
  If the Chicago Electric Analytical Instruments monitor works but the LED doesn't, try adjusting the dimmer. If that doesn't work, replace the camera if needed, or check the fiberglass cable and connections for damage and replace them if needed.
P
Paige RowlandSep 4, 2025
Why are there fuzzy or vertical lines on my Chicago Electric 93765 Analytical Instruments monitor screen in a hot environment?
- B
  Benjamin Jefferson IISep 5, 2025
  If you see fuzzy or vertical lines on the monitor screen of your Chicago Electric Analytical Instruments when the camera is used in a hot environment, allow the camera to cool down. Ensure you are only using it in environments between -20 °F and 120 °F. If the problem persists, have a qualified technician service or replace the camera.
F
franklinharrisonSep 7, 2025
What to do if the LEDs light, but there is no image on screen of my Chicago Electric 93765?
- V
  Valerie MendozaSep 7, 2025
  If the LEDs light up but there is no image on the screen of your Chicago Electric Analytical Instruments, adjust the contrast and brightness.
B
Bruce ChungSep 10, 2025
How to fix a loose, cracked, or broken camera lens on a Chicago Electric 93765 Analytical Instruments?
- B
  Brittany RamirezSep 12, 2025
  If the camera lens of your Chicago Electric Analytical Instruments is loose, cracked, or broken, replace the camera.