For additional technical assistance, call 800/TEC-TRUE (800-832-8783) or visit our website at chicagofaucets.com.
1
HyTronic
®
User Guide Installation Instructions
For single supply and dual supply HyTronic faucets
Overview
Chicago Faucets deck mounted faucets feature cast brass bodies and precision cartridges for years of reliable
operation. Metering models with adjustable cycle time offer true water savings.
Notice to the Installer
• Make sure there is enough space and lighting available during installation and service
• Do not modify or convert this Chicago Faucets product yourself. All warranties will be voided.
Pressurized plumbing fixtures shall be installed in accordance with manufacturer’s recommendations. The
supply piping to these devices shall be securely anchored to the building structure to prevent installed device
from unnecessary movement when operated by the user. Care shall be exercised when installing the device to
prevent marring the exposed surface.
NOTE: The information in this manual is subject to change without notice.
Please leave this manual with the facility manager after completing the faucet installation. This document
contains information necessary for routine maintenance and servicing.
NOTE: Before installation, turn off water supplies to existing faucet and remove faucet if replacing. Clean faucet
basin and clear away debris. Flush all supply lines before connecting to faucet. Failure to do so can result in
debris clogging the inlets and/or cartridges.
NOTE: Before installing a new ceramic cartridge flush lines completely.
Safety Information
Read this entire user guide to ensure proper installation. Compliance and conformity to local codes and
ordinances is the responsibility of the installer.
The following safety notes must always be complied with during handling of this product:
• Make sure there is enough space and lighting available during installation and service.
• Do not modify or convert this Chicago Faucets product yourself. All warranties will be voided.
Important
• Installation may be performed at different times of construction by different individuals. For this reason, these
instructions should be left on-site with the facility or maintenance manager.
• Pressurized plumbing fixtures shall be installed in accordance with manufacturer’s recommendations. The
supply piping to these devices shall be securely anchored to the building structure to prevent installed device
from unnecessary movement when operated by the user. Care shall be exercised when installing the device to
prevent marring the exposed significant surface.
• Do not use pipe dope.
• Flush all the water supply lines before making connections.
Traditional
Lavatory
Edge
Curve
Contemporary
Lavatory
Wall Mount
Gooseneck
This faucet comes with all the components needed for installation, however, some tools and
supplies are not included.
• Basin Wrench • Plumber’s Putty
• Adjustable Wrench • Hex Key (supplied)
• Adjustable Locking Pliers • Aerator Key (supplied)
NOTE: Do not use pipe dope on faucet and supply connections.
Possible solenoid contamination could occur and will void any warranty.
To Next Page
Need help?
General
