Chicago Pneumatic CP9116 User Manual

Operator’s Manual
CP9116
Cutting Tool
WARNING
To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and
understand these instructions, as well as separately provided safety
instructions part number 6159948750, before performing any such task.
8940172152 Rev 02

Chicago Pneumatic CP9116 Specifications

General

Model Number	CP9116
Air Inlet Size	1/4" NPT
Operating Pressure	90 psi
Minimum Hose Size	3/8"
Sound Level	85 dB
Cutting Capacity (Steel)	1.6 mm

Summary

CP9116 Cutting Tool Safety Warnings

Essential Operator Safety Precautions

Read and understand all instructions and safety guidelines before using, installing, repairing, or maintaining the tool.

CP9116 Cutting Tool Technical Specifications and Operation

Machine Type and Application

Tool is for abrasive material removal only. For professional use. Read instructions before starting.

Operating the CP9116 Cutting Tool

Connect clean air, fix accessories. Pull trigger (A) to start; increase pressure for speed. Release trigger to stop.

Lubrication of the Cutting Tool

Use SAE #10 oil in air line lubricator (2 drops/min) or add daily if no lubricator is used.

Maintenance and Service Procedures

Follow regulations. Qualified personnel only. Disconnect power. Inspect every 3 months. Replace worn parts.

Tool Disposal Guidelines

Dispose according to country legislation. Remove damaged or worn devices from service. Repairs by technical staff only.

EC Declaration of Conformity

Statement of conformity for CP9116 Cutting Tool with EU Machinery Directive and relevant standards.