Need help?Do you have a question about the Chicago Pneumatic CPM 10 and is the answer not in the manual?
General| Model | CPM 10 |
|---|---|
| Power Source | Electric |
| Horsepower | 10 HP |
| Tank Capacity | 80 Gallons |
| Voltage | 230V |
| Phase | Single Phase |
Explains warning symbols used in the manual for clear communication.
Outlines general safety rules for operating and maintaining the compressor.
Details safety measures to follow during the installation process of the unit.
Specifies safety guidelines for operating the compressor safely.
Lists safety procedures for maintenance and repair tasks on the equipment.
Provides an overview of the air-cooled, single-stage, oil-injected screw compressors.
Explains the path of air and oil within the compressor system.
Details the components and function of the oil circulation system.
Describes the cooling components and their function for efficient operation.
Explains the components of the unloader assembly and regulation.
Identifies and describes the components of the compressor's control panel.
Outlines the electrical components and diagrams of the compressor.
Explains safety valves and their function in protecting the system.
Describes the function and process of the air dryer component.
Introduces the controller and its general functions for compressor management.
Details the buttons and display elements of the controller interface.
Explains the meaning of various icons shown on the controller display.
Describes the primary display screen and its information.
Explains how to start, stop, and view the compressor status.
Details the conditions and display for shutdown warnings.
Explains reasons for compressor shutdown and related displays.
Describes service alerts and indicators for maintenance.
Explains how to navigate the controller menu structure.
Instructions to view the total running hours of the compressor.
Instructions to view the number of motor start cycles.
Instructions to view the operating hours of specific modules.
Instructions to view the time the compressor was in loaded operation.
Instructions to view the number of loading actions.
How to view and reset the service timer.
How to select or change pressure bands for regulation.
How to set load/unload pressure values for selected bands.
How to change temperature display units (°C/°F).
How to change pressure display units (bar/psi/MPa).
How to adjust the display backlight timeout.
Information on the automatic restart function after power loss.
Instructions for locking and unlocking the control panel keyboard.
General guidelines and considerations for compressor installation.
Refers to external drawings for unit dimensions and part labeling.
Provides instructions for making electrical connections to the compressor.
Explains various pictographs and their meanings.
Steps for the first-time startup of the compressor.
Procedures for starting the compressor during normal operation.
Instructions for safely stopping the compressor.
Procedures for safely removing the compressor from service.
Outlines routine maintenance tasks and intervals.
Information on cleaning and maintaining the drive motor.
Details recommended oil types and their properties.
Step-by-step guide for changing oil, filters, and separators.
Guidelines for storing the compressor when not in use.
Information on available service kits for maintenance.
Instructions for environmentally responsible disposal of materials.
Step-by-step instructions for replacing the air filter.
Instructions for cleaning and maintaining oil coolers.
Procedures for testing the safety valve.
Guide for replacing and adjusting drive belts.
Table specifying recommended cable sizes for different power variants.
Table with settings for overload relays and fuses based on power variant.
Specifies operating conditions and limitations for the compressor.
Provides detailed technical specifications for different compressor models.
To Next Page