Need help?Do you have a question about the Chicago Pneumatic QRS 20 and is the answer not in the manual?
General| Model | QRS 20 |
|---|---|
| Type | Rotary Screw Compressor |
| Power | 20 HP |
| Weight | 1200 lbs |
| Dimensions | 52 x 32 x 48 inches |
| Maximum Pressure | 125 psi |
| Voltage | 208-230/460 V |
| Phase | 3 |
| Motor Power | 20 HP |
| Max Pressure | 125 PSI |
| Drive | Direct Drive |
Details requirements for covered premises, ventilation, and air quality for compressor installation.
Provides technical specifications for standard QRS compressor models.
Lists electrical specifications for QRS models across different voltages.
Details technical specifications for CPVS compressor models.
Illustrates physical dimensions and layout for compressor installation.
Describes the CP compressor unit as a self-contained, oil-cooled, helical screw-type assembly.
Guidelines for proper disposal of components and machine at end of life.
Lists the standard components included in the compressor unit.
Details safety valves, sensors, and control mechanisms for compressor operation.
Explains the meaning of various pictograms used on the compressor.
Introduces the ES 3000 electronic controller for the compressor.
Guidelines for safe handling, optimal room conditions, and unit mounting.
Instructions for connecting air discharge piping and essential electrical setup.
Essential safety regulations for electrical installations.
Steps for unit preparation, checks, and the initial start-up procedure.
Adjusting delivery pressure and guidelines for parallel operation.
Precautions regarding flammable oil and fire safety measures during operation.
Explains the flow of air and oil within the compressor system with diagrams.
Explains phase control for rotation and use of special oils like Food Grade Oil.
Highlights CPVS differences, specific safety rules, and warnings related to its inverter.
Installation advice for CPVS, including fuse specifications.
CPVS pressure settings for parallel operation and speed-based regulation.
A table detailing maintenance tasks and their schedules.
Maintenance advice for the turbine fan and oil/air cooler.
Refastening electric connections and steps for compressor decommissioning.
Solutions for common issues like start-up failures, overheating, and noise.
To Next Page