8 9
6. Push the pin on one arm up until it
is resting firmly against the bottom
of the table. It will click as it moves
through each possible position.
Repeat this step with the pin on the
other arm.
Attaching the chair to the table
6
4. If the pin is up, lower it so it is all
the way down before you attach
Hook-on Chair to the table. Press
the triggers on the bottom of each
arm so that the pins slide toward
the ground. Rotate the knob on the
bottom of the pin on each arm in a
clockwise direction.
4
5
Attaching the chair to the table
5. Hold the chair in position on the
table so that the arms are level with
the table surface. Push the chair onto
the table until it cannot go any
further. Check to make sure there is
not a gap between the edge of the
table top and the arms.
To Next Page
Loading...
