What to do if Chicco Electric Steam Sterilizer does not turn on?
First, ensure the appliance is receiving power by checking the electrical outlet and verifying the switch is in the ON position. Also, check the cord plug and connector to make sure they are correctly plugged in and undamaged. If the sterilizer was submerged in water, discard it. If the problem persists, contact Customer Service.
Why do feeding bottles get stained after using Chicco Electric Steam?
Staining may occur due to scale deposits within the appliance or high mineral content in your tap water. To resolve this, descale the sterilizer following the instructions in the “Care and Maintenance” section. Alternatively, use distilled water to prevent mineral build-up.
What to do if Chicco Laboratory Equipment indicator light doesn't turn on?
Turn OFF the appliance using the ON/OFF switch on the back. Unplug it from the wall and let it cool completely. Then, plug it back in, turn the power ON, and press the “CYCLE” button again. If it still doesn't work, contact Customer Service.
Why does Chicco Electric Steam Laboratory Equipment have rapid scale build-up?
Rapid scale build-up is often due to using tap water with high mineral content, or softened/treated water. Switch to distilled water to minimize scale formation. Additionally, descale the sterilizer as described in the “Care and Maintenance” section.
Why is my Chicco Electric Steam making noise and not completing the cycle?
An incomplete cycle accompanied by noise usually indicates excessive scale deposits on the heating plate. You should descale the sterilizer. Refer to the “Care and Maintenance” section for detailed instructions.
General| Brand | Chicco |
|---|---|
| Model | Electric Steam |
| Category | Laboratory Equipment |
| Language | English |
Precautions to prevent burns from hot surfaces and steam during operation.
Key safety measures for handling, supervision, and electrical safety.
Instructions for measuring water and arranging bottles in the sterilizer.
How to connect power and initiate the sanitization cycle.
Details on cycle end, automatic shut-off, and cooling procedures.
Guidelines for regular cleaning of the sterilizer.
How to remove mineral scale buildup using vinegar and water.
Contact details for USA customers with questions or missing parts.
Contact details for Canadian customers for service.
To Next Page
