To Next PageTo Next Page
Need help?Do you have a question about the Chicco LiteWay Plus and is the answer not in the manual?
General| Harness | 5-point |
|---|---|
| Storage Basket | Yes |
| Brakes | Rear wheel brakes |
| Type | Umbrella Stroller |
| Foldable | Yes |
| Wheel Type | Plastic |
| Canopy | Adjustable |
| Compatibility | Compatible with KeyFit and Fit2 infant car seats |
| Maximum Child Weight | 50 lbs |
| Recline Positions | Multi-position recline |
| Weight Capacity | Up to 50 lbs (22.7 kg) |
Insert the front wheel into the appropriate joint and ensure it clicks into place.
Keep children at a safe distance and verify the stroller's locking mechanism is engaged.
Release the side locking device and push the stroller’s front part forward.
Push the rear locking mechanism down with your foot to ensure it is locked.
Push levers down to lock brakes; push levers up to unlock.
Use levers to switch between swivel and fixed wheel modes for different terrains.
Read safety instructions and ensure proper harness and seat attachment.
Place carrier into frame, ensure it clicks, and pull up to verify secure attachment.
Squeeze release handle and lift carrier by its handle to remove.
Unzip and remove the seat cover attached to the backrest.
Fold the seat cover and tuck it into the pocket under the leg rest.
Unfold the backrest, click it into position, and undo the side backrest buckle.
Locate inserts, attach side backrest panels to frame, and insert buckles.
Rotate levers to adjust and press buttons to release the leg rest.
Use harness positions above the child's shoulder line; use for infants under 6 months.
Familiarize yourself with the harness features: shoulder straps, loops, waist, and crotch straps.
Insert prongs into holes and buckle, then adjust strap length for a proper fit.
Cover the center buckle with the provided cover strap.
Squeeze lever to recline; push up to raise the backrest to different positions.
Fasten the canopy clip to the stroller frame, ensuring the button nests into the hole.
Attach canopy to seat back, connect zipper ends, and pull to close.
Unlock side canopy locks and pull back on the front edge to close.
Slide straps around stroller hooks to attach the storage basket.
Attach the cup holder to the right leg of the stroller below the parent handle.
Pull both waist belts through the seat back openings to begin cover removal.
Unfasten side fabric buckles and release the fabric cover from the frame.
Unfasten straps holding the seat front and undo side snaps/straps to release fabric.
Ensure backrest is up, then pull fabric cover forward from the backrest.
The stroller can be folded and unfolded in both Toddler and KeyFit® modes.
Remove carrier, pull rear lock mechanism up, and push side pedal to unlock.
Push handles forward until the locking mechanism locks the stroller in place.
Refer to care labels for fabric; wipe plastic parts with a damp cloth.
Lubricate moving parts, check wheels, screws, and fabric for wear.
Provides contact phone numbers, email, and addresses for USA and Canadian customers.
Instructions and warnings for attaching and using the Chicco KeyFit® infant carrier.
Steps to prepare, attach, and secure the infant carrier for mode conversion.
