Need help?Do you have a question about the Chicco Corso and is the answer not in the manual?
General| Type | Full-Size Stroller |
|---|---|
| Weight Capacity | 50 lbs |
| Harness | 5-point harness |
| Canopy | Adjustable sun canopy with peek-a-boo window |
| Suspension | Yes |
| Storage | Large storage basket |
| Car Seat Compatibility | Chicco KeyFit 30 |
| Compatibility | Chicco KeyFit 30 |
| Recline | Multi-position recline |
Never leave child unattended, use seat belt, avoid falling out, prevent finger entrapment.
Adhere to weight limits, walking speed, avoid stairs/escalators, and proper storage basket use.
Discontinue use if damaged, avoid strangulation hazards, and ensure correct infant car seat compatibility.
Infant car seat adapter must be properly attached for safe use.
Always secure child with car seat harness and check infant car seat attachment.
Refer to infant car seat manual for additional warnings and use instructions.
Identifies the stroller frame, front wheels, rear wheels, and rear axle.
Details washers, pins, and hubcaps, noting they are in a small red bag.
Lists the seat frame, armbar, canopy, and infant car seat adapter.
Instructions on standing and unfolding the stroller frame until it locks.
Steps for inserting the rear axle and securing rear wheels with washers and pins.
Procedure for attaching the front wheels to the stroller frame.
Guidance on using Fixed Mode for uneven surfaces and Swivel Mode for normal roads.
Instructions on how to lock and release the front wheels for swivel or straight movement.
Steps to remove front wheels using the release button and pulling the wheel.
Procedure for attaching the seat frame to the stroller frame securely.
Information on attaching the seat in forward or parent-facing positions.
How to adjust the seat to three different reclining positions.
Instructions for adjusting the footrest to four different positions.
Steps to slide canopy attachment clips onto the seat frame.
How to open, close, reveal mesh panel, and extend the canopy.
Procedure to remove the canopy by pulling up on the attachment clips.
Push down on brake lock levers to apply brakes on rear wheels.
Pull up on brake lock levers to release the rear wheels.
Explanation of the two suspension modes for different terrains.
How to flip levers for smooth (stiff) or rough (soft) terrain.
Identifies pockets in the basket and on the seat back for accessories.
Adjusts shoulder straps to three height positions using D-rings.
Connects shoulder strap connectors to waist strap clips and then to crotch strap buckle.
How to release the harness by pressing the buckle button and pulling clips.
Adjusts shoulder and waist strap lengths for a proper fit.
Steps to insert armbar tongues and press side buttons to release.
Remove seat, prepare adapter arms, and attach to stroller slots until it clicks.
Press both buttons on the attachment and pull up to remove the adapter.
Place Chicco infant car seat on adapter, ensuring secure click.
Squeeze release handle and lift carrying handle to remove car seat.
Lock brakes, ensure swivel mode, lift edge, and fold stroller in half.
Locate and lift the fold handle to initiate the folding process.
Specific steps for folding when the car seat adapter is attached.
Steps to detach seat from frame, remove footrest and back fabric.
Guide to removing harness straps, pads, and crotch strap components.
Thread crotch strap through pad, insert tabs into buckle and D-ring slots.
Thread shoulder strap through pad, insert positioner strap tab into D-ring slot.
Removable fabric parts can be machine washed; wipe plastic and dry metal parts.
Lubricate moving parts, check wheels, keep clean, and store in a dry place.
Provides phone, email, website, and mailing address for inquiries.
To Next Page
